Turnout

Janitor interview questions to ask applicants

Leer en español

This guide is for owners and supervisors at commercial cleaning companies, and for property and facility managers who hire their own janitors. Most janitors work evenings or overnight, often alone, in a building that belongs to your client. You will not be there to watch, so you are hiring for reliability and good judgment as much as for cleaning skill.

The six questions take about 15 minutes. If you can, hold the interview at one of your buildings and walk a floor together at the end. What they notice on that walk (a full trash can, a dusty vent, a sticky spot by the coffee machine) tells you a lot.

Six questions to ask every janitor applicant

  1. What kinds of buildings have you cleaned, and which floor machines have you run? Auto scrubber, burnisher, carpet extractor?

    Why ask
    Cleaning a house and cleaning a 40,000 square foot office at night are different jobs. Floors are where experience matters most, because the wrong pad or chemical can ruin a floor in one night.
    A good answer
    Names buildings, machines and tasks, like "Two years of nights at a three-story medical office. I ran a walk-behind auto scrubber and a burnisher, and I've done strip and wax on VCT."
    Red flag
    Says they have done floors for years but cannot walk you through the steps of a strip and wax.
  2. You're alone in an office building at 9 pm with three floors to finish by 2 am, and you find a toilet overflowing onto the restroom floor. What do you do?

    Why ask
    Something always goes wrong on a night route, and there is nobody to ask. You want someone who handles it safely, reports it and still finishes the route, or tells you what did not get done.
    A good answer
    Puts out wet floor signs, shuts off the water at the valve behind the toilet, cleans up with a wet vac and disinfects. Then texts the supervisor or writes it in the log so building maintenance hears about it, and reorders the rest of the route.
    Red flag
    Closes the restroom door and leaves it for the day staff without telling anyone.
  3. This route runs Monday to Friday from 6 pm to 2:30 am, and we do floor work on some Saturdays. Which of those nights can you work?

    Why ask
    Cleaning contracts have fixed hours, and the client notices when a night gets skipped. Ask about the exact nights you need, including the Saturdays for floor projects.
    A good answer
    Commits to the nights and is honest about limits, like "Monday to Friday is fine, and I can do two Saturdays a month if you tell me a week ahead."
    Red flag
    Says nights are no problem but cannot tell you what time they could get here.
  4. How will you get to the building by 6, and what's your backup if your car or your ride falls through? If you can't make it, when would you call us?

    Why ask
    When a janitor does not show, the client walks into a dirty office the next morning, and that is how cleaning companies lose accounts. You need someone with a backup plan who calls early enough for you to send someone else.
    A good answer
    Knows the route and the backup, like "I drive, it's 15 minutes, and if my car is down I take the bus and leave an hour early. If I can't come at all, I call my supervisor by noon."
    Red flag
    Plans to tell you the next day, or thinks a missed night does not matter because nobody is in the building.
  5. Which cleaning products should never be mixed, and how do you keep what you use on toilets away from break room counters?

    Why ask
    Mixing bleach with ammonia or with an acid toilet bowl cleaner makes a toxic gas, and some people do it thinking it will clean better. Spreading restroom germs to the break room is the other common mistake.
    A good answer
    Never mixes bleach with ammonia or acids, uses the dilution station or the ratio on the label, and wears gloves and eye protection. Uses color-coded cloths and a separate mop for restrooms.
    Red flag
    Says they add a little bleach to everything to make it work better.
  6. When could you start? Before you work a building alone, you'll spend a few nights with a lead learning the route, the alarm and the keys. Can you do those nights this week or next?

    Why ask
    Handing someone keys and an alarm code on day one is a risk for you and for your client. Training nights with a lead also show you how fast and how careful they are.
    A good answer
    A clear date and room for training, like "I give my current job a week's notice, so I can start on the 14th and do training nights that whole week. I already have work boots."
    Red flag
    Wants to skip the training nights and get the keys right away.

Quick yes or no questions before the interview

Ask these by text or on the phone. A no on any of them saves you both an interview.

Questions not to ask

Keep every question about the job. Do not ask about age, religion, health or disability, pregnancy, marital status or children, or where someone is from. If you need to know whether someone can work in the US, ask only whether they are legally authorized to work in the United States. EEOC: prohibited practices

Questions owners ask

How do I know a new janitor is doing the work when nobody is in the building?
Pair them with a lead for the first nights, then give them a checklist for each area. Spot check a few rooms early the next morning, before the client's staff arrives, and walk the building with the client once a month. If your alarm system gives each person their own code, you can also see when they arrived and left.
Should I hire someone who has only cleaned houses?
Often, yes. House cleaners tend to notice details, and you can teach floor machines, your chemicals and the dilution system. Check that they are fine with nights, can keep pace in a large building and are comfortable working alone. Start them on restrooms and offices, and add floor work once they have been trained on the machines.
Do I have to train janitors on cleaning chemicals?
For the hazardous chemicals they use, yes. OSHA's Hazard Communication standard (29 CFR 1910.1200) requires you to train workers on the hazardous chemicals in their work area when they are first assigned, and to keep the safety data sheets where they can get to them during every shift. In practice, show each new hire the labels, the dilution station, the gloves and goggles, and how to find the safety data sheets during a shift.