Turnout

Lube technician interview questions to ask applicants

Leer en español

This page is for quick lube owners, service managers and shop managers hiring lube techs for oil changes, filters, fluids and tire pressure. A careful person can learn the bay in a couple of weeks. What you really need is someone who does the same checks on the 30th car of the day as on the first, because one loose drain plug or a car sent out without oil can cost you an engine and a customer.

Plan on about 15 minutes for these six questions. Ask them out in the shop rather than in the office, because watching how someone moves around a bay tells you a lot about how they'll work in one.

Six questions to ask every lube technician applicant

  1. Tell me about the oil changes you've done. Was it at a shop or on your own cars? In a pit or on a lift? What else did you check while the car was there?

    Why ask
    Pit shops and lift shops work differently, and someone who has only changed oil at home needs more training. Either can work out if you know which one you're getting.
    A good answer
    Specifics, like "A year in a pit shop, mostly lower bay: drain plug, filter and leak check, and I called everything out to the upper tech before the oil went in."
    Red flag
    They say they "know cars" but can't explain how they'd check the oil level after filling.
  2. It's Saturday morning, cars are lined up to the street, and the customer in your bay is in a hurry. You pull the old filter and its rubber gasket isn't on it. What do you do?

    Why ask
    A double gasket is a classic way a quick oil change turns into an oil leak on the highway. You want someone who slows down for the one thing that matters, even with a line outside.
    A good answer
    They stop, find the old gasket stuck to the engine, take it off and tell the other tech before the new filter goes on. After the fill they check for leaks, however long the line is.
    Red flag
    They would keep going because the line is long and it will "probably be fine."
  3. We're open until 7 on weekdays and all day Saturday, which is our busiest day, and the bays get hot in summer. Can you work every Saturday and close some weeknights?

    Why ask
    Saturdays and the after-work rush are when you need every bay running. A tech who can't work them is missing from your busiest hours.
    A good answer
    A clear yes on Saturdays and honest limits if there are any, like "Saturdays yes, and I can close three nights a week."
    Red flag
    They want weekdays only, nine to five.
  4. Opening means being here by 7:15. How will you get here, and what did you do the last time you couldn't make it on time?

    Why ask
    When the opener is late, the first customers wait in the lot or drive to the shop down the street. How they handled a bad morning before is the best preview you'll get.
    A good answer
    A clear plan and an honest story, like "I drive, it's 10 minutes, and once my battery died, so I called my manager at 6:30, got a ride and was 20 minutes late."
    Red flag
    They think a text after the shop opened counts as calling in.
  5. What do you watch out for when you work in the pit or under a car on a lift?

    Why ask
    Lube shops have their own hazards: a fall into the pit, burns from hot oil and exhaust parts, a car that comes off a lift set up wrong. The answer shows whether they were trained or just got lucky.
    A good answer
    They watch the pit edge and keep the area around it clear, stay out of the way while a car is guided in, keep their arms out from under hot draining oil, and set the lift arms on the lift points and lower onto the locks before going under.
    Red flag
    They would walk under a car on a lift without checking the arms and the locks.
  6. When can you start? The first week is full days of training next to a senior tech before you work on cars alone. Can you do that whole week?

    Why ask
    You want the start date to line up with your best trainer's schedule. A tech who misses training days ends up learning from whoever happens to be free.
    A good answer
    A date and a clear first week, like "The 1st, I've already given notice, and I have non-slip boots."
    Red flag
    They brush off training because they've "done oil changes for years" on their own cars.

Quick yes or no questions before the interview

Ask these by text or on the phone. A no on any of them saves you both an interview.

Questions not to ask

Keep every question about the job. Do not ask about age, religion, health or disability, pregnancy, marital status or children, or where someone is from. If you need to know whether someone can work in the US, ask only whether they are legally authorized to work in the United States. EEOC: prohibited practices

Questions owners ask

Do I need a lube tech with ASE certification?
Not for oil changes, filters and fluids. ASE matters more when you hire for brakes, diagnostics and repair work. For a lube tech, look for careful habits and someone who follows the checklist on every car, then teach the rest.
Should my lube techs recommend extra services?
In many shops they do, so tell them how you want it done: show the customer the dirty air filter, explain it once and accept a no. In the interview, ask how they would explain a dirty cabin filter to a customer in a hurry. If they sound pushy with you, they will sound pushy with your customers.
How can I check their skills before I hire?
Walk them to a bay and ask them to point out the drain plug and the oil filter on a common car, then tell you how they'd check the level after a fill. Ask where they would find the right tire pressure. The answer you want is the sticker on the driver's door jamb, not the maximum pressure printed on the tire.