Turnout

Forklift operator interview questions to ask applicants

Leer en español

This page is for warehouse managers, shift leads and plant owners who hire their own forklift operators. Plenty of applicants carry a forklift card. Far fewer can put a pallet away at 20 feet in a narrow aisle, load a trailer without putting a fork through the wall, and still drive like there are people on the floor.

The six questions below take about 20 minutes. Leave another 15 for a short driving check on your own truck. OSHA makes the employer responsible for training and evaluating every forklift operator (29 CFR 1910.178(l)), so a card from another job does not replace your own evaluation.

Six questions to ask every forklift operator applicant

  1. Which forklifts have you run at work, and for how long: sit-down, stand-up, reach truck, order picker, electric pallet jack? Propane or electric? What's the highest you've put a pallet away?

    Why ask
    Each truck handles differently. Someone who is great on a sit-down propane truck at a dock may never have put a pallet away at 25 feet on a reach truck.
    A good answer
    Trucks, places and heights, like "Three years on a sit-down propane truck loading trailers, and about a year on a reach truck with the top beam around 24 feet."
    Red flag
    "I can drive anything," with no detail on which trucks, where or how high.
  2. Three trailers are waiting at the doors, the staging lanes are full, and your lead wants the first truck loaded in 30 minutes. Walk me through what you do.

    Why ask
    A rushed dock is where operators cut corners: speeding, traveling with the load up high, or driving into a trailer nobody checked. Listen for how they keep moving without doing any of that.
    A good answer
    They make sure the trailer is chocked or locked to the dock and the floor is solid, load in the order of the load plan, keep the forks low when traveling, and tell the lead early if 30 minutes is not realistic.
    Red flag
    They talk about how fast they are and never mention the trailer, the dock plate or the people on the dock.
  3. We start at 6 am, and when trucks come in late we need the operator to stay until they're unloaded, sometimes two extra hours. Can you do that?

    Why ask
    Late trucks are part of the job. If your operator leaves at 2:30 sharp, the freight sits on the dock until morning.
    A good answer
    A clear yes with any limits said now, like "Yes on weekdays, and Saturdays if I know by Thursday."
    Red flag
    They won't commit to a yes or a no, just "we'll see."
  4. The first trucks show up before 6. How do you get here, and what happened the last time your car or your ride let you down?

    Why ask
    When the forklift operator is late, the whole dock waits. A real story about a bad morning tells you more than a promise.
    A good answer
    A plan and a real story, like "I drive, it's 25 minutes and I leave at 5:15, and last winter when my car wouldn't start I called my lead at 5, got a ride and was still on time."
    Red flag
    They would text after the shift started, or they have never thought about a backup.
  5. You're told to move a pallet that looks heavier than your truck's capacity, or a load that is leaning and badly wrapped. What do you do?

    Why ask
    Tip-overs and dropped loads start in moments like this. You need someone who reads the data plate and will say no to a bad lift.
    A good answer
    They check the weight against the capacity on the data plate and refuse a lift over it, and they get a leaning load restacked or rewrapped before moving it, even if the lead is in a hurry.
    Red flag
    "I've moved heavier than that before, it'll be fine."
  6. Before you drive alone here, we train and evaluate you on our trucks. When can you start, and is there anything you need first?

    Why ask
    The first days go to training and evaluating them on your trucks, so plan the start date around your trainer's schedule. Ask about notice at their current job and safety boots now.
    A good answer
    A firm date and no surprises, like "I can start the 14th, I'll give notice tomorrow, and I have my own steel-toe boots."
    Red flag
    They push back on being evaluated because "I'm already certified."

Quick yes or no questions before the interview

Ask these by text or on the phone. A no on any of them saves you both an interview.

Questions not to ask

Keep every question about the job. Do not ask about age, religion, health or disability, pregnancy, marital status or children, or where someone is from. If you need to know whether someone can work in the US, ask only whether they are legally authorized to work in the United States. EEOC: prohibited practices

Questions owners ask

The applicant has a forklift certification card. Is that enough?
No. OSHA makes the employer responsible for training and evaluating each operator on the trucks and conditions at your site (29 CFR 1910.178(l)). Training from a past job can count for the topics it covered if it fits your trucks and your site, but you still evaluate them on your truck and sign off before they drive alone. Treat the card as a sign they have done this before.
Should I do a driving test at the interview?
Yes, if someone qualified to train and evaluate operators runs it. Ask the applicant to do the pre-shift inspection, pick a pallet off the floor, put it in the rack and pull one off a trailer. Watch for the horn at cross aisles, forks low when traveling, a look behind before reversing, and slow, smooth turns. Keep everyone else out of the area while they drive.
What if they've only driven a pallet jack or a different kind of forklift?
Someone who ran an electric pallet jack every day already knows the dock, the floor and how loads behave, and that counts. A sit-down truck or a reach truck is still new to them, so plan full training and an evaluation on that truck before they drive it alone. OSHA also calls for refresher training when an operator is assigned to a different type of truck, so the same goes for experienced operators switching trucks.